TINY TILLER

The portable, lightweight Tiny Tiller has  a tough 2.0hp, 2 cycle engine. Superior maneuverability allows for working in tight places and raised beds. Available with Edger and De-thatcher kits.

MINNIE TILLER

Merry's Minnie Tiller is the mighty mite of tillers and takes to task any small home gardening project. The Minnie is lightweight but durable, with top-quality fabricated steel construction. This is the perfect model for customers desiring a more compact, transportable tiller.

Engine: 49.2cc; 2 horsepower, 2 cycle.
Fuel Tank Capacity: 20 oz.; gas/oil ration 24:1
Starter: Recoil
Transmission: Durable worm gear
Tines: Heavy duty; 10" cultivator width
Tine Speed: 162 RPM
Throttle: Remote control

Clutch: Heavy duty centrifugal
Tine Shaft: "D" shaped shaft allows additional attachments
Frame: Die-cast aluminum
Handles: Fold-down
Tine Assembly: Heavy duty steel with lifetime warranty
Drag Bar: Opposite end of wheel (Pin setting)
Shipping Weight: 25 lbs

MINNIE SPECS:

Engine: Briggs & Stratton 4 HP, or Honda 2.5 HP
Fuel Tank Capacity: 2 quart
Starter: Recoil
Transmission: Roller chain and sprockets in "00" grease bath
Throttle: Remote control
Clutch: V-belt with positive fingertip control
Tine Shaft: 1" diameter, case hardened, ground and polished carbon steel

Frame: Rugged all steel frame
Handles: Steel with welded supports and cross brace
Rear Wheels: Liftable, detachable, steel rimmed, solid rubber tires
Tine Assembly: Slasher type standard
Drag Bar: 3/8" x 1-1/4" steel, adjustable
Shipping Weight: 95 lbs. with standard Minnie slasher tines.

Border/Edger Kit
Part #711-4696

18" De-thatcher Kit
Part #711-4699

TRANSMISSIONS:

• Heat treated sprockets and gears

• "00" grease bath (factory lubricated)

• Top quality steel roller chain needs less maintenance and delivers more horsepower to the tine than a gear drive

• Tine shaft and idler sprocket have high grade needle bearings

• Ground and polished carbon steel 1-1/4" diameter tine shaft

SUBURBAN TILLER

The Suburban is the choice of serious gardeners and will handle most tilling applications and soil conditions. The all  steel cross braced construction, welded handles and heavy duty hitch casting have stood the pounding of rental use for  decades. Real power that's easy to control!

INTERNATIONAL

The International achieves maximum tine torque by its triple gear reduction transmission and double V belt drive system. In the toughest soil conditions from red clay to hardpan and shale, this extra heavy duty tiller has outperformed its competition time and again. This is simply our BEST. Now standard with 37" wide tine extensions.

Engines Available: Briggs & Stratton 4 HP INTEK OHV, 5.5 HP INTEK OHV,  6 HP OHV I/C or Honda 5.5 HP
Fuel Tank Capacity: 3 qts.
Starter: Recoil
Transmission: Commercial grade roller chain and heat treated sprockets operate in    a continuous "00" grease bath
Throttle: Remote control
Clutch: V-belt with positive finger-tip control
Tine Shaft: 1-1/4" diameter, case hardened, ground and polished carbon steel
 

Frame: Rental tough construction             Handles: Steel with welded supports and cross brace    Rear Wheels: Liftable, detachable, steel rimmed, solid rubber tires
Tines: All welded slasher tines as shown on unit above. Optional bolo tines available. Standard tilling width is 26".
Drag Bar: 3/4" x 1-1/4" steel notched adjustment
Hitch: One-piece casting with non-slip settings to accommodate tilling accessories
Shipping Weight: 141 lbs. with standard slasher tine assembly

INTERNATIONAL SPECS:

Engine: 6 HP INTEK OHV I/C or Honda 5.5 HP
Fuel Tank Capacity: 3 quarts
Starter: Recoil
Transmission: High-torque, rental quality transmission  with heat treated sprockets  and "00" grease bath lubrication
Throttle: Remote control
Clutch: High capacity double V-belt with positive finger-tip control
Tine Shaft: 1-1/4" diameter, case hardened, ground and polished carbon steel
Frame: Rental tough construction

Handles: Steel with welded supports and cross brace
Rear Wheels: Liftable, detachable, steel rimmed, solid rubber tires
Tines: All welded slasher tines as shown on unit above. Optional bolo tines available.  Tilling width adjusts to 14", 26" or 37" wide.
Drag Bar: 3/4" x 1-1/4" steel notched adjustable
Hitch: Heavy duty one-piece with non-slip settings to accommodate tilling accessories
Shipping Weight: 160 lbs. with standard slasher tine assembly

(Specifications subject to change as new developments are made.)